VERY IMPORTANT- This is straight from the Remington website.
PRODUCTS: Remington is voluntarily recalling Remington Model 887™ shotguns manufactured from December 1, 2013 to November 24, 2014.
DESCRIPTION OF THE HAZARD: Remington has determined that some Remington Model 887™ shotguns manufactured between December 19, 2013 and November 24, 2014 may exhibit a defect causing the firing pin to bind in the forward position within the bolt, which can result in an unintentional discharge when chambering a live round. While Remington has the utmost confidence in the design of the 887™ shotgun, it is undertaking this recall in the interest of consumer safety.
REMEDY/ACTION TO BE TAKEN: STOP USING YOUR SHOTGUN.Any unintended discharge has the potential to cause injury or death.Immediately cease use of recalled shotguns and return them to Remington free of charge. Shotguns will be inspected, repaired, tested, and returned as soon as possible, at no cost to you. DO NOT attempt to diagnose or repair recalled shotguns yourself. For your safety, STOP USING YOUR SHOTGUN and immediately contact Remington.
TO PARTICIPATE IN THIS RECALL PROGRAM:
To participate in the recall, please follow the instructions below:
STEP 1 Visit 887recall.remington.com or call 1-800-243-9700 (Prompt #3 then Prompt #2) Monday through Friday, 9 a.m. to 5 p.m. EDT. You will be asked to provide your name, address, telephone number, and shotgun(s) serial number.
STEP 2 Upon receipt of the information requested in Step 1, Remington will send you boxes and written instructions, and arrange for UPS to pick-up your shotgun(s). Please do not return your shotgun on your own. Remington will arrange for pick-up of your Model 887™.
VERIFICATION OF CORRECTIVE ACTION: Upon repair of your shotgun, you will note a punch mark on the bolt (see photo below). This mark confirms your shotgun has been inspected and repaired by Remington under the recall program.